Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve
The Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve is designed to be installed at the point of use (residential and most light commercial installations) to mix hot and cold water from the distribution system to a final safer temperature.
Features & Benefits:
- Available in 3/8", 1/2", 3/4", and 1" Connection
- Compression, FNPT, CPVC, CU Sweat and Barb Connections
- Designed for installation at the point of use
- Suitable for multiple fixtures
- Low-lead law compliant
- ASSE® Listed 1070
- CSA Certified
Ideal for use where Lead-Free* valves are required. The Zurn Wilkins Model ZW1070XL Aqua-Gard® Thermostatic mixing valve is designed to be installed at the point of use to assist in the prevention of scalding. The valve's extremely rapid response rate make it most suitable for installation at plumbing fixtures and appliances for the final control of water temperature. The ZW1070XL is ASSE 1070 listed for fixtures, sinks, lavatories or bathtubs and will mix hot and cold water from the distribution system to a final safer temperature of 95-115°F (35-46°C). Multiple end configurations make this valve suitable for all residential and commercial installations.
- ASSE® Listed 1070
- CSA® Certified
- Meets the requirements of NSF/ANSI 61-9* *(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT.
|Body||Low Lead Cast Bronze, ASTM B 584 W/Nickel Plating ASTM B 456, Service Condition #2|
|Internal Brass||Low Lead Brass, ASTM B 927, UNS C27450|
|Guide Tube||Noryl GFN2|
|Spring & Screen||300 Series Stainless Steel|
|Sizes:||3/8", 1/2", 3/4", 1"|
|Outlet Temp. Range||95-115°F (35-46°C)|
|Temp. Hot Supply||120-195°F max. (49-90.5°C)|
|Temp. Cold Supply||40-75°F (4.4-23.8°C)|
|Set Temp. Accuracy||+/- 3°F(1.78°C)|
|Max. Working Pressure||145 psi|
|Flow Rate||10 GPM @ 45 psi pressure loss|
|Min. Flow Rate||0.35 GPM|
|CPVC Tailpiece||- Maximum Hot water Temperature of
180°F @ 100 psi.
- Cold water rated Temperature of
73.4°F @ 400 psi.
The device is designed to be installed at a single outlet. It may be used to supply individual outlets when there is sufficient supply pressure. It is suggested to use ball valves on the hot and cold inlet supplies.
Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve Specification Submittal: Click Here.
Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve Installation and Maintenance Instructions: Click Here.
Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve Brochure: Click Here.
Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve BIM Model: Click Here.
- Z1070, Z-1070, ZW 1070, 1070, Z1070XL, Z 1070 XL, ZW 1070, ZW-1070XL
We Also Recommend
Zurn P6900-MV-XL Manual Temperature Mixing Valve
Zurn Wilkins 38-ZW3870XLT Lead-Free Aqua-Gard Thermostatic Mixing Valve