The Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve is designed to be installed at the point of use (residential and most light commercial installations) to mix hot and cold water from the distribution system to a final safer temperature.

Features & Benefits:

Available in 3/8", 1/2", 3/4", and 1" Connection
Compression, FNPT, CPVC, CU Sweat and Barb Connections
Designed for installation at the point of use
Suitable for multiple fixtures
Low-lead law compliant
ASSE® Listed 1070
CSA Certified

Application:

Ideal for use where Lead-Free* valves are required. The Zurn Wilkins Model ZW1070XL Aqua-Gard® Thermostatic mixing valve is designed to be installed at the point of use to assist in the prevention of scalding. The valve's extremely rapid response rate make it most suitable for installation at plumbing fixtures and appliances for the final control of water temperature. The ZW1070XL is ASSE 1070 listed for fixtures, sinks, lavatories or bathtubs and will mix hot and cold water from the distribution system to a final safer temperature of 95-115°F (35-46°C). Multiple end configurations make this valve suitable for all residential and commercial installations.

Standard Compliance:

ASSE® Listed 1070
CSA® Certified
Meets the requirements of NSF/ANSI 61-9* *(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT.

Materials:

Body	Low Lead Cast Bronze, ASTM B 584 W/Nickel Plating ASTM B 456, Service Condition #2
Internal Brass	Low Lead Brass, ASTM B 927, UNS C27450
Piston	Polysufone
Guide Tube	Noryl GFN2
Spring & Screen	300 Series Stainless Steel
Seals	Viton
Checks	Noryl GFN2

Features:

Sizes:	3/8", 1/2", 3/4", 1"
Outlet Temp. Range	95-115°F (35-46°C)
Temp. Hot Supply	120-195°F max. (49-90.5°C)
Temp. Cold Supply	40-75°F (4.4-23.8°C)
Set Temp. Accuracy	+/- 3°F(1.78°C)
Max. Working Pressure	145 psi
Flow Rate	10 GPM @ 45 psi pressure loss
Min. Flow Rate	0.35 GPM
CPVC Tailpiece	- Maximum Hot water Temperature of 180°F @ 100 psi. - Cold water rated Temperature of 73.4°F @ 400 psi.

Piping Instructions:

The device is designed to be installed at a single outlet. It may be used to supply individual outlets when there is sufficient supply pressure. It is suggested to use ball valves on the hot and cold inlet supplies.

Technical Documentation:

Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve Specification Submittal: Click Here.

Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve Installation and Maintenance Instructions: Click Here.

Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve Brochure: Click Here.

Zurn ZW1070XL Aqua-Gard® Thermostatic Mixing Valve BIM Model: Click Here.

ALT SKUS:

Z1070, Z-1070, ZW 1070, 1070, Z1070XL, Z 1070 XL, ZW 1070, ZW-1070XL