Acudor RHG3244 24" x 36" Ladder Access Roof Hatch - Galvanized

  • $789.00


  • Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.


  • Weather tight construction • Convenient one-hand operation • 12" high insulated curb • Supports 40lbs./sq. ft. live load.


  • Stainless Steel cover, curb, and/or hardware
  • Polycarbonate domes for daylighting
  • Louvered Curbs, Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • Higher curb heights for "green roof" applications.


  • Cover: Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner.
  • Curb: 14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
  • Hinge: Heavy duty galvanized steel pintle hinges with 3/8" pin.
  • Opening: Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
  • Door Latch: Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
  • Finish: Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel paint.

Technical Documentation:

Acudor RHG3244 24" x 36" Ladder Access Roof Hatch - Galvanized Specification Submittal: Click Here.

Acudor RHG3244 24" x 36" Ladder Access Roof Hatch - Galvanized Product Page: Click Here.

We Also Recommend